9 Best Telescope Tracking Mounts (November 2026)
The best telescope tracking mounts include the MOVE SHOOT MOVE tridaptor for phone digiscoping alignment, the SVBONY SV225 Alt-Azimuth Mount for simple altazimuth tracking, and the Celestron Advanced VX Computerized German Equatorial Mount for heavier computerized tracking.
On this page (8 sections)
- Our top picks for tracking the sky
- The best telescope tracking mounts in detail
- How to compare these telescope tracking mounts
- Which tracking mount type fits your telescope?
- How much payload capacity do you really need?
- Do you need GoTo tracking or manual controls?
- How portable do you need your tracking mount to be?
- Setting up and caring for a tracking mount
The best telescope tracking mount for most buyers is a motorized equatorial mount, because it follows the sky at sidereal rate and keeps objects in view without constant nudging.
Our top pick for phone users who already own a scope is the MOVE SHOOT MOVE tridaptor for alignment, while the strongest dedicated tracking mounts here are the Celestron Advanced VX and the SKy-Watcher Star Adventurer GTi.
You need a mount that matches your telescope weight, your observing style and how far you are willing to carry it.
A mount that is too light will shake, and a mount that is too heavy may stay in the garage.
We compared payload capacity, tracking type, portability and controls across all nine picks below.
Our score weighs specs, features and buyer feedback against what you are shopping for.
We checked the specs for each product, and we looked at how each one helps you follow objects.
We do not test products.
Our picks at a glance
-
1
-
2
Best for simple altazimuth trackingSVBONY SV225 Alt-Azimuth Mount
9.5/10 our score
See it on Amazon -
3
Best for heavier computerized trackingCelestron Advanced VX Computerized German Equatorial Mount
9.4/10 our score
See it on Amazon
- 4
Best for dual finder setupsCheck it - 5
Check itCelestron CG-4 Manual German Equatorial Mount
Best for manual equatorial tracking - 6
Check itAstromania Dovetail Mount Plate
Best for balancing the telescope - 7
Check itSky Watcher Sky-Watcher Star Adventurer GTI Mount
Best for portable GoTo imaging - 8
Check itYueoct Camera Adapter Mount for Telescope Finder
Best for finder scope cameras - 9
Check itKoolpte 90mm Aperture Refractor Telescope with Fine-Tracking
Best for beginners wanting tracking in a kit
Our top picks for tracking the sky
The Celestron Advanced VX leads for heavier computerized tracking, and the Star Adventurer GTi leads for portable imaging.
The SVBONY SV225 and Celestron CG-4 cover manual tracking at lower cost, while accessories like dovetail plates and finder brackets help any mount work better.
Start with our telescope mounts guide if you are unsure which mount type fits your scope.
For motorized options, compare our best goto telescope mounts and our guide to push to telescope systems.
The best telescope tracking mounts in detail
MOVE SHOOT MOVE tridaptor: Best for phone digiscoping alignment
- 3-axis aluminum phone holder
- Fits eyepieces 0.86 to 2.4 inches
- Fits phones 2.36 to 3.44 inches wide
- Bluetooth remote included
A 3-axis metal adapter helps line a phone camera with an eyepiece for sharper digiscoped photos while a tracking mount holds the view steady.
Pros
- Precise 3-axis alignment
- Rigid aluminum build
- Bluetooth remote reduces shake
Cons
- Not a telescope tracking mount by itself
- Requires measuring your eyepiece first
The MOVE SHOOT MOVE tridaptor suits phone users who want to photograph what they see through an eyepiece.
It is not a tracking mount on its own, so pair it with a mount that already holds the view steady.
Its value here is alignment while you track.
Its 3-axis design adjusts left and right, up and down, and forward and back.
That Z-axis move helps you reach the right eye relief and reduce dark edges in photos and video.
The aluminum build is rigid, and rubber pads protect your phone and eyepiece.
It fits most iPhone and Android phones from 2.36 to 3.44 inches wide.
It also fits eyepieces from 0.86 to 2.4 inches in outer diameter, which covers many standard eyepieces.
Measure your eyepiece first, because shorter eyepiece models may not fit.
A Bluetooth remote lets you take photos or video without touching the phone and shaking the image.
At 233 g, it is light enough to carry in a case with your eyepieces.
Trade-off: this adapter does not track anything.
Choose it to improve photos from a scope that already tracks, not as a replacement for a motorized equatorial telescope mount.
SVBONY SV225 Alt-Azimuth Mount: Best for simple altazimuth tracking
- 10 kg stated load capacity
- 2.34 kg mount weight
- Variable-speed slow motion controls
- CNC hollow structure
A lightweight altazimuth mount with fine controls for manually following the Moon and planets during visual observing.
Pros
- Light and portable
- Smooth fine adjustment
- Good for visual observing
Cons
- Manual tracking only
- Stay below maximum load for stability
The SVBONY SV225 suits visual observers who want a light, simple altazimuth mount with fine controls.
It is a grab-and-go option for beginners and for experienced users who do light observing.
You move it quickly for broad pointing, then use the slow-motion levers to follow the Moon and planets.
Its CNC hollow structure keeps weight to 2.34 kg.
That matters if you carry your setup to a darker site or up stairs.
The mount has a stated load capacity of 10 kg, but SVBONY recommends a maximum of 7 to 8 kg for stability.
Staying below the limit keeps tracking smoother.
Altitude adjustment runs from -60 to +60 degrees, and azimuth moves a full 360 degrees.
Variable-speed gears give slow motion on both axes.
That helps you keep a target centered as Earth turns, even though tracking is manual.
The included fine-tuning levers, dovetail lock knobs and Allen wrench cover setup.
If the load is heavy, SVBONY recommends using only the micro-adjustment lever.
Trade-off: manual tracking takes attention.
Choose it for simple visual use, not for long camera exposures that need motorized equatorial tracking.
Celestron Advanced VX Computerized German Equatorial Mount: Best for heavier computerized tracking
- 30 lb payload capacity
- NexStar+ hand control with 40,000+ objects
- Sidereal, solar and lunar tracking rates
- Latitude range 7 to 77 degrees
A computerized German equatorial mount that tracks at sidereal rates and uses GoTo alignment to find and follow objects.
Pros
- High payload capacity
- Computerized GoTo control
- Multiple tracking rates
Cons
- Heavy at 47 lb for the kit
- Needs polar alignment for best tracking
The Celestron Advanced VX suits owners of heavier telescopes who want computerized tracking and GoTo finding.
It is a German equatorial mount with a 30 lb payload capacity, so it covers many mid-size tubes plus accessories.
That headroom helps stability at higher magnifications.
The 2 inch stainless steel tripod legs provide a stable platform and reduce vibration.
Latitude adjusts from 7 to 77 degrees, which covers a wide range of observing locations.
Total kit weight is 47 lb, so plan for car transport rather than backpacking.
Tracking includes sidereal, solar and lunar rates, plus EQ North and EQ South modes.
The NexStar+ hand control holds a database of over 40,000 objects and offers multiple alignment procedures.
That makes finding and then following objects much faster than star hopping alone.
Permanent programmable periodic error correction helps correct recurring gear errors.
New motors provide more power to overcome load imbalances.
The dual saddle plate adds flexibility for different dovetail formats.
Trade-off: weight and setup time.
Choose it for serious visual and imaging use at home, not for a mount you carry on foot.
Astromania Finder Scope Mount: Best for dual finder setups
- Dual Vixen and Synta slots
- All aluminum construction
- No drilling required
- Fits finder scopes and red dot finders
A dual finder bracket that lets you run two aiming devices at once so a tracking mount stays easier to point at night.
Pros
- Holds two finders at once
- No drilling needed
- Lightweight aluminum
Cons
- Accessory only, not a mount
- Requires Vixen-style finder shoe
The Astromania Finder Scope Mount suits observers who use two finding aids at once.
A red dot finder helps you point quickly, while a finder scope helps you center faint objects before tracking begins.
This bracket holds both without drilling.
Its dual base plate has Vixen and Synta style slots.
You slide each device into a slot and lock it with knurled screws that are easy to use with gloves.
The all aluminum alloy construction and anodizing help it last outdoors.
It fits Synta style dovetail finder bases from brands such as Sky-Watcher, GSO, Celestron, Vixen and Orion.
You can mix a finder scope, red dot finder, reflex sight, laser pointer bracket or mini guide scope in any pair.
At 7.9 ounces and about 5.24 inches long, it adds little weight to the tube.
That matters on a tracking mount, where extra weight at the top can affect balance.
Trade-off: this is an accessory, not a tracking mount.
Choose it to point your scope faster so your motorized equatorial mount has less work at the start of the night.
Celestron CG-4 Manual German Equatorial Mount: Best for manual equatorial tracking
- 20 lb equipment capacity
- Steel tripod with 1.75 inch legs
- Manual slow-motion controls on both axes
- Adjustable height 33 to 47 inches
A manual German equatorial mount with slow-motion controls for following objects by hand at a lower cost than motorized options.
Pros
- Strong steel tripod
- Precise slow-motion controls
- Accepts motor drive
Cons
- Manual tracking takes practice
- Heavier than portable sky trackers
The Celestron CG-4 suits buyers who want equatorial tracking without paying for motors and GoTo.
It is a manual German equatorial mount with slow-motion controls on both axes.
You align it roughly to the pole, then nudge it by hand to follow objects.
Its stainless steel tripod has 1.75 inch legs and a height range of 33 to 47 inches.
That size helps you view comfortably and keeps the eyepiece away from the ground.
The tripod weighs 12.5 lb, so it is portable by car but not ultralight.
The mount supports up to 20 lb of optical equipment.
Ball bearings in both axes help it locate and track sky objects smoothly.
A center brace and accessory tray keep eyepieces within reach.
Manual tracking teaches you the sky.
You learn how objects move, how to polar align, and how to keep targets centered.
That skill helps later if you upgrade to a motorized equatorial telescope mount.
Trade-off: you must track by hand all night.
Choose it for budget equatorial learning, or when you plan to add a motor drive later.
Astromania Dovetail Mount Plate: Best for balancing the telescope
- 228 mm Vixen dovetail rail
- Anodized aluminum
- 1/4 inch photo thread
- Long bores for M6 and 1/4 inch screws
A 228 mm dovetail plate that slides in a saddle so you can balance a tube and reduce strain on the tracking mount.
Pros
- Long 228 mm rail for balance
- Durable anodized aluminum
- Fits Vixen GP style saddles
Cons
- Plate only, no mount included
- Check saddle length before ordering
The Astromania Dovetail Mount Plate suits anyone whose telescope is hard to balance on a tracking mount.
A 228 mm Vixen style rail slides in the saddle so you can shift the tube forward or back until weight is even on both sides.
Balanced tubes track more smoothly.
Motors work less, gears mesh better, and vibration drops.
That matters on both equatorial and altazimuth mounts, especially near the payload limit.
The plate is anodized aluminum, so it resists scratches and corrosion.
Long bores accept M6 and 1/4 inch cylinder head screws.
Countersunk undersides help with dual or side-by-side setups.
A 1/4 inch photo thread in the middle lets you attach the bar to a photo tripod or tripod head.
That gives you a quick way to adapt a telescope to a stable photo tripod for daytime or wide-field use.
It fits Vixen GP and SX style saddles and Sky-Watcher EQ3 to EQ5 and H-EQ5 saddles, among others.
Measure your saddle length before ordering.
Trade-off: it is a plate, not a mount.
Choose it as a small upgrade that improves balance on almost any tracking setup.
Sky Watcher Sky-Watcher Star Adventurer GTI Mount: Best for portable GoTo imaging
- Full GoTo equatorial tracking
- 11 lb payload capacity
- Built-in WiFi and illuminated polar scope
- Kit includes counterweight bar, tripod and pier extension
A portable GoTo equatorial mount kit built for camera lenses and small telescopes, with WiFi control and multiple tracking rates.
Pros
- Portable GoTo tracking
- WiFi phone control
- Complete tripod kit included
Cons
- 11 lb payload limits tube size
- Best for imaging small setups
The Sky-Watcher Star Adventurer GTi suits astrophotographers who want portable GoTo equatorial tracking.
It is a full GoTo mount head in a compact kit, built for camera lenses, small telescopes and DSLR or mirrorless cameras.
Its 11 lb payload capacity sets the limit.
The kit includes a counterweight bar, 5 lb counterweight, tripod and pier extension.
Maximum height reaches 44.5 inches.
Total kit weight is 26 lb, so it travels far better than a full-size German equatorial mount.
A built-in illuminated polar scope helps with polar alignment in EQ mode.
Built-in WiFi lets you control the mount from a smartphone.
Ports for USB, autoguider and SNAP shutter control support camera imaging.
Multiple tracking rates include lunar, solar and sidereal.
A dual-position counterweight helps at low latitudes.
An optional SynScan hand controller adds another control path.
V-style dovetail mounting keeps tube changes simple.
Trade-off: payload.
Choose it for lightweight imaging and travel, not for heavy tubes that need a 30 lb class mount.
Yueoct Camera Adapter Mount for Telescope Finder: Best for finder scope cameras
- Fits 33 to 36 mm finder dovetail bases
- 1/4 inch mounting screw
- Solid aluminum with anti-slip pads
- 4 mm Allen wrench included
A small adapter that holds a camera on a finder scope base for wide-field recording while your main mount tracks.
Pros
- Compact 47 g design
- Secure anti-slip pads
- Includes Allen wrench
Cons
- Finder base size must match
- Accessory only, not a tracking mount
The Yueoct Camera Adapter Mount suits observers who want to record through or alongside a finder scope.
It mounts into a finder dovetail base and holds a camera in place while recording.
That can give you a wide-field view while your main telescope tracks a target.
The bottom fits standard finder dovetail bases from 33 to 36 mm (1.3 to 1.42 inches).
Measure your base first, because finder shoe sizes vary.
A 1/4 inch mounting screw attaches to cameras and other items with 1/4 inch threads.
Solid aluminum and stainless steel construction keeps it rigid.
Two anti-slip rubber pads grip the camera and protect it from scratches.
A 4 mm Allen wrench is included for setup.
At 47 g, it adds almost no load to your finder shoe.
That matters because finder shoes are small and can flex under heavy accessories.
Trade-off: it does not track or point a telescope by itself.
Choose it as a niche accessory for finder-scope imaging, not as part of a main tracking mount.
Koolpte 90mm Aperture Refractor Telescope with Fine-Tracking: Best for beginners wanting tracking in a kit
- 90 mm aperture, 800 mm focal length
- Vertisteel AZ mount with slow-motion knobs
- 25 mm and 10 mm eyepieces plus 3X Barlow
- Adjustable tripod with accessory tray
A complete refractor kit whose AZ mount uses slow-motion knobs for coarse positioning and fine tracking of bright targets.
Pros
- Complete kit in one box
- Fine-tracking slow-motion controls
- Good for Moon and planets
Cons
- Altazimuth tracking is manual
- 240x depends on conditions
The Koolpte 90mm refractor suits beginners who want a complete kit with fine-tracking controls.
Its Vertisteel AZ mount gives two levels of control.
You move the telescope quickly for broad positioning, then use slow-motion knobs for precise centering and tracking.
The 90 mm aperture and 800 mm focal length gather light for bright views and give comfortable image scale for lunar craters, bright planets and star clusters.
It also works for daytime landscapes.
Four power options come from the included eyepieces and Barlow.
The 25 mm eyepiece gives 32x, the 10 mm gives 80x, and the 3X Barlow extends those to 96x or a calculated 240x.
Start at low power and increase only when the image stays sharp.
The kit includes the optical tube, mount and tripod, finderscope, diagonal mirror, eyepieces, Barlow, phone adapter, accessory tray and manual.
The adjustable tripod and tray keep the setup organized.
Trade-off: tracking is manual on an altazimuth base.
Choose it for a self-contained starter kit, not for motorized equatorial imaging.
How to compare these telescope tracking mounts
We compared tracking type first, because that decides how you use the mount all night.
Motorized equatorial mounts track on one axis, manual equatorial mounts need hand nudges, and altazimuth mounts track with two axes.
Next we compared payload capacity against real load.
Add your tube, finder, diagonal, eyepiece or camera and any accessories.
A mount rated to 10 kg works best at 7 to 8 kg, as SVBONY notes for its SV225.
We also compared portability and controls.
The Star Adventurer GTi kit weighs 26 lb, while the Advanced VX kit weighs 47 lb.
GoTo and WiFi controls save time, but manual controls cost less and teach you the sky.
| Product | Best for | Eyepiece fit | Phone fit | Weight | Our score |
|---|---|---|---|---|---|
| MOVE SHOOT MOVE tridaptor | phone digiscoping alignment | 0.86 to 2.4 inches (22 to 61 mm) | 2.36 to 3.44 inches wide (60 to 87.5 mm) | 233 g | 9.6 |
| SVBONY SV225 Alt-Azimuth Mount | simple altazimuth tracking | 2.34 kg | 9.5 | ||
| Celestron Advanced VX Computerized German Equatorial Mount | heavier computerized tracking | 9.4 | |||
| Astromania Finder Scope Mount | dual finder setups | 7.9 ounces | 9.3 | ||
| Celestron CG-4 Manual German Equatorial Mount | manual equatorial tracking | 9.2 | |||
| Astromania Dovetail Mount Plate | balancing the telescope | 8.8 ounces | 8.9 | ||
| Sky Watcher Sky-Watcher Star Adventurer GTI Mount | portable GoTo imaging | 8.7 | |||
| Yueoct Camera Adapter Mount for Telescope Finder | finder scope cameras | 47 g | 8.6 | ||
| Koolpte 90mm Aperture Refractor Telescope with Fine-Tracking | beginners wanting tracking in a kit | 8.3 |
Which tracking mount type fits your telescope?
A motorized equatorial mount is best for long tracking and imaging.
It follows at sidereal rate after polar alignment.
The Advanced VX and Star Adventurer GTi are the motorized equatorial options here.
A manual equatorial mount is best for learning.
The CG-4 gives you slow-motion controls on both axes and accepts a motor drive later.
You track by hand, which is slower but simpler to set up.
An altazimuth mount with slow motion is best for visual use.
The SV225 and the Koolpte kit let you point quickly and then follow bright targets by hand.
Our best altazimuth telescope mount guide covers this type in more depth.
Motorized equatorial telescope mount
Choose this type if you plan to image or observe at high magnification for long periods.
Sidereal tracking keeps the target centered with small corrections.
GoTo helps you find objects fast.
Altazimuth mount
Choose this type if you mainly view the Moon, planets and bright clusters.
Setup is fast because leveling the tripod is enough to start.
Tracking needs more nudges as objects move across the sky.
How much payload capacity do you really need?
Buy for the total load, not just the tube weight.
Your finder, diagonal, eyepiece, camera and cables add weight at the worst place, far from the mount head.
A safe rule from the data here is to stay at about 70 to 80 percent of the stated capacity.
The SV225 is rated to 10 kg and SVBONY recommends 7 to 8 kg.
The Advanced VX is rated to 30 lb, and the Star Adventurer GTi to 11 lb.
Balance matters as much as capacity.
The Astromania 228 mm dovetail plate helps you slide the tube until weight is even.
A balanced load reduces strain and vibration on any mount.
Balancing a German equatorial mount
Slide the tube in the saddle, then adjust counterweight position.
The tube and counterweight should balance on both sides of the polar axis.
Check balance at several positions, because balance changes as the mount moves.
Balancing an altazimuth mount
Center the tube over the azimuth axis.
Use the dovetail plate to shift the tube forward or back.
A balanced altazimuth mount moves smoothly and holds position when you let go of the controls.
Do you need GoTo tracking or manual controls?
GoTo tracking saves time if you want to find faint objects fast.
The Advanced VX NexStar+ controller holds over 40,000 objects.
The Star Adventurer GTi adds GoTo with WiFi phone control.
Manual controls save money and teach you the sky.
The CG-4 and SV225 use slow-motion controls that you turn to follow objects.
Many visual observers prefer that direct approach for the Moon and planets.
If you want finding help without full GoTo, consider push to telescope systems or a diy telescope goto mount.
For firmware and control tips on a specific mount, see our skywatcher az gti firmware update guide and our celestron starsense autoguider review.
GoTo equatorial mounts
GoTo mounts need a power supply, a correct date, time and location, and an alignment routine.
Once aligned, they find and track objects with little input.
Read our celestron advanced vx equatorial mount review for a detailed look at one option.
How portable do you need your tracking mount to be?
Weight decides whether you actually use the mount.
A 47 lb kit stays home more often than a 26 lb kit, even if the heavier mount tracks better.
The Star Adventurer GTi kit weighs 26 lb including tripod and pier extension.
The SV225 mount head weighs 2.34 kg.
The CG-4 tripod alone weighs 12.5 lb.
Compare those numbers with how far you carry your gear.
Backyard use
A heavier German equatorial mount is fine if you set up in one spot and leave it covered.
Stability matters more than weight, and you can polar align once and refine it over time.
Travel and dark sites
A portable GoTo kit with WiFi control is easier to carry and set up in the dark.
You trade payload capacity for ease of transport.
That trade is worth it if travel gets you to darker skies.
Setting up and caring for a tracking mount
Level the tripod first, then polar align if you use an equatorial mount.
A level tripod makes azimuth and altitude adjustments predictable.
For equatorial tracking, alignment to the celestial pole improves how well sidereal tracking keeps objects centered.
Use the latitude scale to set your latitude, then refine with the polar scope or finder.
The Star Adventurer GTi has a built-in illuminated polar scope.
The Advanced VX offers All-Star Polar Alignment through its hand control.
Tighten locks, check dovetail fit, and balance the load before dark.
Wipe metal parts dry after dew, store counterweights safely, and keep hand controls and cables in a case.
Our verdict: pick the Celestron Advanced VX if you need a 30 lb computerized motorized equatorial telescope mount at home.
Pick the Sky-Watcher Star Adventurer GTi if you want portable GoTo tracking for cameras and small telescopes.
Pick the SVBONY SV225 or Celestron CG-4 if you prefer manual tracking and simple setup.
Add a dovetail plate and a dual finder bracket, and any of these mounts will work better from the first night.
Our top 3 picks at a glance
-
1
-
2
Best for simple altazimuth trackingSVBONY SV225 Alt-Azimuth Mount
9.5/10 our score
See it on Amazon -
3
Best for heavier computerized trackingCelestron Advanced VX Computerized German Equatorial Mount
9.4/10 our score
See it on Amazon
Frequently asked questions
What is a telescope tracking mount?
A telescope tracking mount moves to follow the sky as Earth rotates. A motorized equatorial mount tracks at sidereal rate on one axis.
An altazimuth mount tracks with two axes.
Manual slow-motion controls let you follow objects by hand.
Is a motorized equatorial mount better than altazimuth?
For long exposures, a motorized equatorial mount is usually better because it tracks on one axis aligned with the pole. For visual observing, an altazimuth mount is simpler to set up and point.
Choose by payload, portability and whether you plan to image.
How much payload do I need?
Add the weight of your optical tube, finder, eyepiece or camera, plus accessories. Stay below the stated capacity for stability.
SVBONY recommends 7 to 8 kg on a mount rated to 10 kg.
A well balanced load tracks more smoothly than a load at the limit.
Do I need GoTo tracking?
GoTo tracking helps you find objects and then follow them. The Celestron Advanced VX uses a NexStar+ hand control with over 40,000 objects.
The Star Adventurer GTi adds GoTo in a portable kit.
Manual mounts can work well if you enjoy finding objects yourself.
About this guide: Our look at telescope tracking mounts draws on maker specs, materials and what owners report. See how we research.



