Comparison

Celestron vs Meade Mounts: Which Should You Choose? (November 2026)

Updated on · By the Telescope Junkies team

Choose Celestron when you want a documented computerized equatorial mount with a clear payload, and choose Meade compatibility when your telescope already uses Meade-style dovetail hardware. In this celestron vs meade mounts comparison, the exact mount type, payload and dovetail standard matter more than the brand name alone.

On this page (10 sections)
  1. The quick verdict
  2. Celestron vs Meade mounts side by side
  3. Mount designs: alt-azimuth and equatorial
  4. Payload and equipment compatibility
  5. Dovetail standards and saddle fit
  6. Finder bases: Astromania vs SVBONY
  7. The SV219 dovetail plate and balance
  8. Tracking, control and setup effort
  9. Who should buy which
  10. Final verdict

Choose Celestron for a computerized equatorial mount with a stated 30 lb payload, and choose Meade hardware when your telescope and finder base already follow Meade patterns. In celestron vs meade mounts, check the dovetail standard, the payload and the mount type before you care about the logo on the tripod.

The Celestron Advanced VX Computerized German Equatorial Mount has a 30 lb payload and a NexStar+ hand control with a 40,000+ object database. That gives you a clear spec to match against your telescope.

The smaller parts in this comparison solve different problems. A finder dovetail base holds an aiming device on the tube.

A 210 mm dovetail plate connects the tube to the mount saddle. Neither part turns a small mount into a heavy-duty mount.

This guide compares mount designs, tracking features and equipment compatibility. It also explains when a finder base or a dovetail plate is the part you actually need.

Astromania Finder Scope Mount Universal Dovetail BaseBest for adding a finder to an SCT

Astromania Finder Scope Mount Universal Dovetail Base

9.4/10Our score

See it on Amazon

Celestron Advanced VX Computerized German Equatorial MountBest for computerized equatorial tracking

Celestron Advanced VX Computerized German Equatorial Mount

9.4/10Our score

See it on Amazon

The quick verdict

The Celestron Advanced VX is the only full mount here, while the other products are small parts for a telescope that already has a mount.

Choose the Advanced VX for a German equatorial mount with computerized tracking and a 30 lb payload. Its 2 inch stainless steel tripod legs limit vibration at high magnification.

Choose Meade compatibility when your Schmidt-Cassegrain tube has factory drilled holes that match a Meade style finder base. The Astromania base fits factory drilled holes on some Celestron, Meade and Orion telescopes.

A finder base screws to the tube, while a mount carries the whole tube on a saddle and tripod. That fit does not make a Meade tube the same as a Meade mount.

Celestron vs Meade mounts side by side

The table shows the real differences: mount type, payload, dovetail fit and finder mounting. Brand names alone do not tell you whether a tube will balance or a finder will clamp on.

ItemCelestron optionMeade-related fitSmall parts
Main mountAdvanced VX German equatorialDepends on your Meade tube and saddleNot a full mount
Payload30 lbCheck your mount ratingPlate is 183 g
ControlNexStar+ hand controlCheck your mount controlsManual thumbscrews
DovetailCG-5, CGE-style or VixenSome factory holes on SCT tubesV-style or finder dovetail

The Advanced VX uses 2 inch stainless steel tripod legs. Celestron says that design gives a stable platform and reduces vibration at high magnification.

Total kit weight is 47 lb for the mount and tripod. That is transportable for many observers, but it is not a light grab-and-go setup.

The Astromania finder base weighs 1.73 ounces. The SVBONY finder base weighs 1.44 ounces.

Both are small parts, so weight is not the main choice between them.

Why the side-by-side matters

A mount must hold the tube at both ends of its travel. A German equatorial mount places the tube on one side of the polar axis.

That design needs balance in right ascension, not just a strong tripod.

A finder base only holds a small aiming device. It does not change the payload rating of your mount.

Do not add finder brackets and plates, then ignore their weight when you check the limit.

The Advanced VX also lists a dual saddle plate in its specifications. That detail matters only if your tube uses a compatible CG-5, CGE-style or Vixen dovetail.

A Meade Schmidt-Cassegrain tube may use different factory holes and bracket spacing. Measure those holes before you assume a Celestron mount saddle or finder base will fit as intended.

Mount designs: alt-azimuth and equatorial

Celestron's Advanced VX is a German equatorial mount, while many simple mounts are alt-azimuth. The design changes how the telescope moves and how you track the sky.

Our comparison of altazimuth mount vs equatorial mount explains the trade-off. Alt-azimuth mounts move in altitude and azimuth.

Equatorial mounts align one axis with Earth's rotation.

Alt-azimuth designs are simple to set up for casual viewing. They can need awkward flips near the zenith when you track an object across the sky.

Equatorial designs track with one axis for long periods. That helps with astrophotography and with smooth visual tracking at high magnification.

The Advanced VX has a latitude adjustment range of 7 to 77 degrees. You set latitude to match your observing location, then align the polar axis.

Our guide to telescope mount types helps you name the design before you shop. That step prevents buying a plate for the wrong saddle.

Celestron and Meade mount tracking features

The Advanced VX offers sidereal, solar and lunar tracking rates, plus EQ North and EQ South modes.

Sidereal tracking follows stars and deep-sky objects, solar tracking follows the Sun, and lunar tracking follows the Moon.

The NexStar+ hand control has multiple alignment procedures. Celestron also lists All-Star Polar Alignment, SkyAlign, PPEC and Celestron PWI software support.

PPEC means programmable periodic error correction, and Celestron says integer gear ratios and PPEC reduce repeat tracking errors from the worm gear. That matters most for imaging, though steady tracking still helps visual use at high magnification.

New motors offer improved tracking performance and more power to overcome load imbalances. That power helps only when the tube is balanced and stays under the 30 lb rating.

Payload and equipment compatibility

Check payload with the full setup installed, not with the bare tube. The Advanced VX is rated for 30 lb, covering your telescope and accessories together.

Telescopes with CG-5, CGE-style or Vixen format dovetails are listed as compatible for the Advanced VX. That is the first fit check.

The SVBONY SV219 is a 210 mm dovetail plate for V-style saddles on equatorial mounts and narrow-style dovetails on smaller alt-azimuth mounts. Its mounting holes include 3/8-16 and 1/4-20 options, plus a 27 mm continuous groove for bolt spacing and balance.

You can slide the tube forward or back until the weight is balanced over the saddle. The plate weighs 183 g, so it adds a small but real load.

The Astromania base fits Schmidt-Cassegrain telescopes from Celestron, Meade and Orion, listed for an SCT optical tube. The SVBONY finder base lists telescope and finderscope as compatible, but you still need a way to fix it to the tube.

Dovetail standards and saddle fit

Dovetail names describe the bar and saddle shape, not the brand alone. Celestron lists CG-5, CGE-style and Vixen formats for the Advanced VX.

The SV219 plate is a V-style plate for V-style saddles, and also fits narrow-style dovetails on some smaller alt-azimuth mounts. That narrow-style fit does not turn the plate into an equatorial saddle, so check saddle width and clamping design before you order.

The Astromania base is a Synta-style dovetail base for finder brackets. It accepts finder scope, reflex sight and green laser pointer brackets, and its drilled but not threaded holes take screws up to 5 mm in diameter.

The included two M5 screws complete the installation on a compatible tube. Center to center spacing must be from 10.2 to 30.2 mm for that base to be compatible.

The SVBONY finder base includes no tube attachment screws and needs M4 thread screws. If your tube has threaded M4 holes it may fit, while holes for M5 screws point to the Astromania base.

Measuring before you order

Measure the distance between hole centers with calipers or a ruler. Do not measure from edge to edge, because the Astromania specification uses center to center spacing.

Check whether the holes are threaded or unthreaded. An unthreaded hole needs a screw that threads into the tube, while a threaded hole needs a matching screw length.

Check the bracket that will sit on the base. A finder scope bracket, a reflex sight bracket and a laser pointer bracket may use the same dovetail slot but different clamping width.

Check the tube diameter at the intended position. The SVBONY description says its slots fit any diameter tube, yet the base still needs a flat enough mounting area and correct screws.

Finder bases: Astromania vs SVBONY

Both finder bases use two large thumbscrew locks, so the choice comes down to screws, spacing and tube fit. Neither includes the finder scope itself.

The Astromania base is high strength aluminum with anodizing and die-cast metal construction. Its locks secure a finder scope, red dot finder mount or reflex sight bracket without extra tools, and work even when wearing gloves.

The SVBONY base is also high strength aluminum with anodizing, with CNC machining and a precisely cut rail. Its two large thumb screw locks make removal and reinstallation faster outdoors.

The Astromania base includes two M5 screws, an advantage for Celestron, Meade or Orion SCT tubes with matching factory drilled holes. The SVBONY base includes no tube attachment screws, so you must supply M4 thread screws.

Weight favors SVBONY by 0.29 ounces, which is negligible on a full telescope. Dimensions differ at 1.63 by 1.74 by 3.06 inches for Astromania and 2.16 by 1.37 by 2.36 inches for SVBONY.

Astromania suits an extra red dot finder or backup finder scope alongside a main device on SCT tubes. SVBONY suits adding a second or third aiming device or a custom position on a tube without a compatible base.

The SV219 dovetail plate and balance

The SV219 plate balances the tube in the saddle, it does not hold a finder. Its 210 mm length gives a long rail for moving the tube.

The plate is precision machined from aluminum alloy and black anodized to a hard finish. SVBONY says that finish makes the dovetail more durable and extends service life.

The 27 mm continuous groove lets mounting bolts sit at many spacings instead of only at fixed drilled holes. The plate includes two M6 screws and an M5 Allen wrench to attach it to tube rings or a mounting block.

It has 3/8-16 and 1/4-20 mounting screw holes, so confirm the thread in your tube ring before you tighten anything. A longer plate helps with front heavy or back heavy tubes, and you can shift the tube until the saddle feels balanced.

Balance still depends on your eyepiece, diagonal, finder and camera. The plate fits V-style saddles on many mainstream mounts and narrow-style dovetails on smaller alt-azimuth mounts, so measure the saddle opening first.

Tracking, control and setup effort

The Advanced VX is a computerized mount, so setup effort is higher than a simple alt-azimuth mount. The benefit is GoTo pointing and tracking over long periods.

The NexStar+ hand control provides a 40,000+ object database to select targets without a phone or star chart. Its multiple alignment procedures still require a level tripod, a correct latitude setting and polar alignment.

The latitude range is 7 to 77 degrees, so set it for your location rather than leaving a default. All-Star Polar Alignment, SkyAlign and Celestron PWI software support can simplify alignment, without removing the need to understand the mount axes.

The design allows viewing or imaging across the meridian without interference from motor housings. That helps when a German equatorial mount flips sides during a long session.

A finder base does not improve tracking, it only helps you point more accurately at the start. The SV219 plate does not improve tracking either, it balances the tube and can reduce motor strain.

Who should buy which

Buy the Celestron Advanced VX if you want a full computerized equatorial mount and your tube uses a compatible dovetail. It suits visual observers and imagers who accept a 47 lb kit.

Buy Astromania finder compatibility for a Celestron, Meade or Orion Schmidt-Cassegrain tube with factory holes spaced from 10.2 to 30.2 mm. The included M5 screws make it the more complete finder base for that tube.

Buy the SVBONY finder base if you already have M4 screws and want a lighter base for a second aiming device. It also suits a tube that lacks a finder base and needs a custom position.

Buy the SVBONY SV219 plate if your tube sits in a V-style saddle and needs better balance. Its 210 mm length and continuous groove are the reasons to choose it.

Do not buy the Advanced VX for an incompatible dovetail, as it lists CG-5, CGE-style and Vixen formats. Do not buy a finder base as a substitute for a dovetail plate, and do not buy the SV219 plate for a saddle that is not V-style or narrow-style.

Meade owners should start with tube holes and saddle type. A Meade tube may match the Astromania finder base, yet still need a different plate or saddle for a Celestron equatorial mount.

Final verdict

Celestron wins as a complete mount choice here, while Meade compatibility wins only when your existing tube hardware already matches it. The Advanced VX gives a clear 30 lb payload and computerized tracking.

The Astromania base suits many Celestron, Meade and Orion SCT tubes because it includes M5 screws and fits factory drilled holes. Its 10.2 to 30.2 mm spacing rule is easy to check before you order.

The SVBONY finder base is lighter at 1.44 ounces and suits a second or third aiming device. Its lack of included tube screws is the main tradeoff.

The SVBONY SV219 plate is the best balance tool in this list. Its 210 mm rail and 27 mm continuous groove help you position the tube in a V-style saddle.

For celestron vs meade mounts, brand matters less than dovetail format, payload and mount type. Measure first, match the saddle, then choose the part that fits your tube.

Frequently asked questions

Are Celestron and Meade mounts interchangeable?

Not by brand alone. The dovetail format, saddle type, payload and control system decide fit.

Check whether your telescope uses a CG-5, CGE-style, Vixen or Meade-style dovetail before you buy a mount or plate.

What payload should you choose for a mount?

Stay under the rated payload with the telescope, finder, diagonal and eyepiece installed. The Celestron Advanced VX is rated for 30 lb.

A plate or finder base adds little weight, but the full optical tube still counts toward the total.

Do you need a dovetail plate or a finder base?

They do different jobs. A dovetail plate connects the tube to the mount saddle so you can balance it.

A finder base holds a small aiming device on the tube.

You may need both, but one does not replace the other.

Which mount type is easier for beginners?

A computerized mount can help you find objects, but you still need polar alignment for equatorial use. Learn the mount type first.

Our guide to telescope mount types explains alt-azimuth and equatorial designs in plain terms.