9 Best Tripods for Smart Telescopes (November 2026)
The best tripod for smart telescope include the Amazon Basics 50-inch Lightweight Portable Camera Tripod for light smart telescopes on a budget, the VICTIV 74” Camera Tripod for tall setups and phone holders, and the DWARFLAB Mini Tripod with Hydraulic Head for DWARF 3 smart telescopes.
On this page (9 sections)
- Which tripod fits a smart telescope best
- How does a smart telescope tripod compare to a regular camera tripod
- How we compared these smart telescope tripods
- How much weight should a smart telescope tripod hold
- What height should a tripod for a smart telescope reach
- Which head type works best on a smart telescope tripod
- Do you need a model-specific tripod for a Seestar or DWARF scope
- How do you set up and care for a smart telescope tripod
- Which tripod should you buy for your smart telescope
The best tripod for smart telescope use is the Amazon Basics 50-inch pick for lighter scopes, because it weighs only 1.23 lb, reaches 50 inches, and costs less than most full-size stands. Its 4.4 lb limit is the key check.
If your scope sits above that limit, move to a higher-capacity pick below.
A smart telescope tripod needs three things first. It needs a mount thread that fits your scope, a load limit above your scope weight, and legs that stay steady on your ground.
Height comes after those three checks.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared the picks on stated load limits, height range, folded size, head type and mount threads.
Our picks at a glance
-
1
Best for light smart telescopes on a budgetAmazon Basics 50-inch Lightweight Portable Camera Tripod
9.7/10 our score
See it on Amazon -
2
-
3
Best for DWARF 3 smart telescopesDWARFLAB Mini Tripod with Hydraulic Head
9.6/10 our score
See it on Amazon
- 4
Check itK&F Concept 64 inch/163cm Lightweight Aluminum Travel
Best for travel with a ball head - 5
Check itVictiv Tripod for Camera and Phone
Best for tripod and monopod use - 6
Check itCelestron Heavy-Duty Alt-Azimuth Tripod for Spotting Scopes
Best for heavy-duty alt-azimuth control - 7
Check itJOILCAN 74" Tripod for Camera Cell Phone
Best for a 15 lb stated load limit - 8
Best for ball head and monopod flexibilityCheck it - 9
Check itZWO Seestar TH10 Tripod Head with TC20
Best for Seestar equatorial mode
Which tripod fits a smart telescope best
The Amazon Basics pick wins for light scopes because of its low weight and simple setup. The DWARFLAB and ZWO picks win when you own the matching smart telescope, because the fit is direct and the head matches the job.
For general buying help, start with our guide to telescope mounts and our best smart telescope mount roundup. Those pages cover mount types beyond a simple camera tripod.
Amazon Basics 50-inch Lightweight Portable Camera Tripod: Best for light smart telescopes on a budget
- 50-inch maximum height
- 16.1 to 50 inch adjustable height
- 1.23 lb weight
- Aluminum construction
- 4.4 lb maximum equipment weight
- 3-way head with bubble level
- Quick-release plate
- Zippered storage bag
A light 50-inch aluminum tripod that suits lighter smart telescopes and travel use. Its 4.4 lb limit and 1/4 inch style mounting need checking before heavier scopes.
Pros
- Very light at 1.23 lb
- Reaches 50 inches
- Three-section lever-lock legs
- Includes storage bag
Cons
- 4.4 lb load limit is low
- Not for large telescopes or long lenses
The Amazon Basics 50-inch tripod suits buyers with a light smart telescope under its 4.4 lb limit. It weighs only 1.23 lb, so it is easy to carry to a dark site or a backyard corner.
The legs adjust from 16.1 inches to 50 inches with three sections and lever locks.
Its 3-way head allows tilt and swivel motion, with portrait or landscape options and a built-in bubble level. The quick-release plate helps you remove the scope fast between sessions.
A zippered storage bag comes with the stand.
The main trade-off is the low load limit. Amazon Basics says not to use it with heavy, high-end DSLR cameras, cameras with long lenses and large telescopes.
Total equipment weight should not exceed 4.4 pounds.
Pick this tripod if your smart telescope and accessories stay under 4.4 lb. Skip it if your scope is heavy or if you need a stated load limit well above your gear.
VICTIV 74” Camera Tripod: Best for tall setups and phone holders
- 74-inch maximum height
- 19 to 74 inch height range
- 3.14 lb weight
- Aluminum construction
- 3-way pan head
- 360 degree pan and 180 degree tilt
- Standard 1/4 inch screw mount
- Phone holder and extra quick-release plate
- Carrying bag
A tall 74-inch tripod with a phone holder and 3-way pan head. It suits standing work and viewers who want extra height.
Pros
- Tall 74-inch reach
- Includes phone holder
- Extra quick-release plate
- Weight hook for added stability
Cons
- Heavier than the Amazon Basics pick
- No stated load limit in the data
The VICTIV 74-inch tripod suits buyers who want full standing height and a phone holder in one kit. It adjusts from 19 inches to 74 inches and weighs 3.14 lb.
The aluminum legs fold down for storage, and a carrying bag comes with the tripod.
Its 3-way pan head allows 360 degree horizontal shots, 180 degree up and down shots, and 90 degree vertical portraits. Non-slip pads help the feet grip the ground.
A weight hook lets you hang a backpack for extra stability.
The standard 1/4 inch screw mount fits cameras and scopes listed in the data, including spotting scopes, binoculars and projectors. A universal phone holder and an extra quick-release plate come in the box.
The trade-off is weight and the lack of a stated load limit in the data. It is heavier than the Amazon Basics pick and less direct than a model made for one smart telescope.
DWARFLAB Mini Tripod with Hydraulic Head: Best for DWARF 3 smart telescopes
- Made for DWARF mini and DWARF 3
- 53 cm maximum height
- 25 to 53 cm working height
- 0.85 kg weight
- Aluminum alloy construction
- 6.61 lb or 3 kg load capacity
- Hydraulic head with 360 degree pan
- Tilt from -75 to +90 degrees in specs and -80 to +90 in description
- 1/4 inch and 3/8 inch connectors
- Quick-release plate
- 7.09 inch folding height
A compact mini tripod built for DWARF 3 and DWARF mini. Its hydraulic head and 6.61 lb capacity fit the intended scope directly.
Pros
- Made for DWARF 3 and DWARF mini
- Folds to 7.09 inches
- Hydraulic head for smooth positioning
- 1/4 inch and 3/8 inch connectors
Cons
- Short 53 cm maximum height
- Narrower fit than general tripods
The DWARFLAB mini tripod suits DWARF 3 and DWARF mini owners first. It is built for those scopes, with a 1/4 inch thread and connectors in both 1/4 inch and 3/8 inch sizes.
The tripod supports up to 6.61 lb, or 3 kg.
Its five-section legs adjust from 25 cm to 53 cm. The folded height is only 7.09 inches, and the weight is 0.85 kg.
That size makes it easy to pack in a small bag for travel to a dark site.
The hydraulic head offers 360 degree horizontal movement. Tilt ranges from +90 to -75 degrees in the specs, and the description lists -80 to +90 degrees.
A quick-release plate helps with fast attachment and removal.
The trade-off is height and scope fit. At 53 cm, this is a low tripod, so you will bend or sit for viewing.
It also makes most sense with DWARF scopes rather than a Seestar or another brand.
K&F Concept 64 inch/163cm Lightweight Aluminum Travel: Best for travel with a ball head
- 64.1 inch maximum height
- 20.4 to 64.1 inch height range
- 2.53 lb weight
- Aluminum construction
- 36 mm ball head
- 17.6 lb or 8 kg ball head capacity
- 360 degree panning
- Standard 1/4 inch thread
- Arca-Swiss style quick-release plate
- 15.5 inch folded length
- Tripod bag and phone holder
A 64-inch travel tripod with a 36 mm ball head rated to 17.6 lb. It folds to 15.5 inches and suits buyers who want fast angle changes.
Pros
- Folds to 15.5 inches
- 360 degree ball head
- 17.6 lb head capacity
- Flip leg locks for fast setup
Cons
- Ball head moves differently from a pan head
- Travel size limits low-angle work
The K&F Concept 64-inch tripod suits travel users who want a ball head. Its four-section legs adjust from 20.4 inches to 64.1 inches.
It folds to 15.5 inches and weighs 2.53 lb with the ball head included.
The 36 mm ball head rotates to any angle and can withstand up to 17.6 lb, or 8 kg. A 360-degree panning dial helps with wide views.
Flip leg locks let you open and close the legs with one hand.
A standard 1/4 inch thread fits most cameras, DSLR cameras, projectors and telescopes listed in the data. The tripod works with Arca-Swiss style quick-release plates.
A phone holder, quick-release plate, tripod bag and allen wrench come with it.
The trade-off is head style. A ball head is fast to adjust, but it moves in all directions at once.
A pan head gives separate control for pan and tilt, which some buyers prefer for slow aiming.
Victiv Tripod for Camera and Phone: Best for tripod and monopod use
- 72-inch maximum height
- 21 to 72 inch height range
- 3.3 lb weight
- Aluminum alloy construction
- Converts to 55 inch monopod
- 3-way swivel head
- 360 degree panning and tilt
- Extra Arca Swiss mounting plate
- Carrying bag
- Remote listed in title
A 72-inch tripod that also works as a 55-inch monopod. It suits users who want one stand for viewing and moving between spots.
Pros
- 72-inch maximum height
- Converts to a 55-inch monopod
- Flip leg locks
- Extra Arca Swiss plate
Cons
- Head cannot be removed
- No stated load limit in the data
The Victiv 72-inch tripod suits buyers who want one stand for a tripod and a monopod. It adjusts from 21 inches to 72 inches and weighs 3.3 lb.
It converts to a 55-inch monopod in about five seconds, according to Victiv.
Its aluminum alloy legs use thicker tubes than an ordinary tripod, according to the brand. Flip leg locks help with fast setup.
A strapped carrying bag comes with the tripod for travel use.
The smooth 3-way swivel head allows 360 degree panning and tilting in horizontal and vertical directions. An extra universal Arca Swiss mounting plate helps you swap devices.
The head cannot be removed.
The trade-off is the lack of a stated load limit in the data. It also weighs more than the Amazon Basics and K&F Concept picks.
Pick it for flexibility, not for the lightest carry.
Celestron Heavy-Duty Alt-Azimuth Tripod for Spotting Scopes: Best for heavy-duty alt-azimuth control
- 45-inch maximum height
- 32 to 45 inch height range
- 7.8 lb weight
- Aluminum legs
- Center brace and metal accessory tray
- Two slow-motion controls
- 1/4-20 thread mounting plate
- 2-year US warranty
A heavier 45-inch alt-azimuth tripod with slow-motion controls and a center brace. It suits manual tracking and shared viewing more than travel.
Pros
- Slow-motion controls for tracking
- Center brace and accessory tray
- Sliding 1/4-20 mounting plate
- 2-year US warranty
Cons
- Heavy at 7.8 lb
- Shorter 45-inch maximum height
The Celestron heavy-duty alt-azimuth tripod suits viewers who want slow-motion controls. It adjusts from 32 inches to 45 inches and weighs 7.8 lb.
The two-section aluminum legs are the tallest part of the build, with a center brace for stability.
A metal accessory tray sits in the center of the brace. That tray keeps eyepieces, adapters or small tools close at hand during a session.
Celestron includes a 2-year US warranty and support from US-based experts.
Two slow-motion control handles help with small tracking moves. For large altitude changes, you move the mount and a friction clutch holds it in place.
For azimuth, you loosen the lock and spin up to 360 degrees.
Equipment mounts with a standard 1/4-20 thread mounting bolt. The bolt slides along a slot in the plate, so you can shift the scope forward or back for balance.
The trade-off is weight and a shorter top height than the tall picks here.
JOILCAN 74" Tripod for Camera Cell Phone: Best for a 15 lb stated load limit
- 74-inch maximum height
- 19.5 to 74 inch height range
- 3.15 lb weight
- Aluminum construction
- 15 lb maximum load capacity
- 3-way pan head
- 360 degree rotation
- Standard 1/4 inch screw
- Phone holder
- Two quick-release plates
- Zippered storage bag
- 18 inch compact size
A 74-inch tripod with a stated 15 lb load capacity and a 3-way pan head. It gives buyers a clear weight margin for heavier smart scopes.
Pros
- Stated 15 lb load capacity
- 74-inch maximum height
- Two quick-release plates
- Three-position leg angle adjustment
Cons
- Heavier than travel picks
- Taller folded size than the K&F Concept pick
The JOILCAN 74-inch tripod suits buyers who want a clear stated load limit. It supports up to 15 lb and weighs 3.15 lb.
The legs adjust from 19.5 inches to 74 inches, with a compact size of 18 inches when folded.
Its 3-way pan head rotates 360 degrees. Head, pan and tilt locks help you set vertical, horizontal and overhead positions.
The tripod also has a 3-position leg angle adjustment for different ground setups.
Rubber feet give a firm grip on different terrain. Thicker tubes help resist twisting and shaking, according to JOILCAN.
A built-in weight hook lets you hang a backpack or sandbag for extra stability in wind.
Quick-release plates and a phone holder come with the tripod, along with a zippered storage bag. A standard 1/4 inch screw fits cameras, DSLR and SLR cameras, webcams, projectors, spotting scopes and binoculars.
The trade-off is travel weight. At 3.15 lb, it is heavier than the Amazon Basics pick.
Its 18-inch folded size is also larger than the K&F Concept and Nietoto picks.
Nietoto 2 in 1 Camera Tripod: Best for ball head and monopod flexibility
- 68-inch maximum height
- 16.5 to 68 inch working height
- 3.85 lb weight
- Aluminum construction
- 33 lb maximum load capacity
- 36 mm CNC metal ball head
- 360 degree pan
- 1/4 inch and 3/8 inch screws
- Converts to monopod
- 16.5 inch folded size
- Carry bag
- Cellphone holder
A 68-inch tripod with a 36 mm ball head, a stated 33 lb capacity, and monopod conversion. It suits buyers who want one flexible stand.
Pros
- Stated 33 lb load capacity
- 36 mm ball head
- Converts to a monopod
- Folds to 16.5 inches
Cons
- Heavier at 3.85 lb
- Extra hunting features may not matter for a smart scope
The Nietoto 68-inch tripod suits buyers who want a ball head and a monopod in one stand. Its four-section legs adjust from 16.5 inches to 68 inches.
It weighs 3.85 lb and folds to 16.5 inches, with a carry bag included.
The tripod states a maximum load capacity of 33 lb. Its 36 mm CNC metal ball head provides strong locking force, according to Nietoto.
Two independent pan and tilt knobs help with aiming, and a 360 degree scale helps with repeatable framing.
It also converts into a monopod or hunting stick. You unscrew the end load-bearing hook from the center column and connect it to a detachable handle leg.
That change suits walks between viewing spots.
The tripod has 1/4 inch and 3/8 inch screws for wide compatibility. A cellphone holder, extra quick-release plate and extra rubber feet come in the package.
The trade-off is weight and extra features that a smart scope user may never use.
ZWO Seestar TH10 Tripod Head with TC20: Best for Seestar equatorial mode
- For Seestar S30, S30 Pro and S50
- TH10 for S50 use
- TH10 plus TC20 for S30 use
- 411 g or 0.91 lb weight
- Supports up to 5 kg or 11 lb
- 360 degree pan and 180 degree tilt
- Hydraulic damping system
- Quick-release plate
- 1/4 to 3/8 inch adapter
- TC20 carbon fiber tripod in the combo
A Seestar-specific head and tripod combo for equatorial mode. The S50 needs the TH10, while the S30 uses the TH10 plus TC20 combination.
Pros
- Made for Seestar equatorial mode
- Supports 11 lb
- Visits 360 degree pan and 180 degree tilt
- Quick-release plate and adapter
Cons
- Seestar-specific rather than general
- Combo choice depends on S30 or S50
The ZWO Seestar TH10 with TC20 suits Seestar owners who want equatorial mode. ZWO says Seestar S50 users only need the TH10, while Seestar S30 users are recommended to buy the TH10 plus TC20 combination.
That split matters before you order.
The TH10 weighs 411 g, or 0.91 lb, and supports up to 5 kg, or 11 lb. Its hydraulic damping system gives fluid control for small moves.
It pans 360 degrees and tilts 180 degrees, with specs listing plus or minus 90 degrees of tilt.
A quick-release plate supports both 3/8 inch and 1/4 inch screws. A 1/4 to 3/8 inch threaded screw adapter and a detachable handle come with the head.
The TC20 is a carbon fiber tripod in the combo.
ZWO says the head is also compatible with most DSLRs, mirrorless cameras and camcorders. The trade-off is fit.
This is a Seestar-focused pick, not a general tripod for every smart telescope brand.
How does a smart telescope tripod compare to a regular camera tripod
A regular camera tripod can work fine when the thread and load limit fit your scope. Most picks here use a standard 1/4 inch screw, so a Seestar, DWARF or other smart scope may mount with no adapter.
The difference is head style and stated limits. A pan head gives separate pan and tilt locks.
A ball head moves in many directions at once and locks after you aim.
Some smart scopes also use model-specific heads for equatorial mode. That is why ZWO and DWARFLAB make scope-specific options.
For Seestar S30 Pro help, see our best tripod for seestar s30 pro guide.
| Product | Best for | Maximum height | Weight | Load limit | Our score |
|---|---|---|---|---|---|
| Amazon Basics 50-inch Lightweight Portable Camera Tripod | light smart telescopes on a budget | 50 inches | 1.23 lb | 4.4 lb | 9.7 |
| VICTIV 74” Camera Tripod | tall setups and phone holders | 74 inches | 3.14 lb | 9.6 | |
| DWARFLAB Mini Tripod with Hydraulic Head | DWARF 3 smart telescopes | 53 cm | 0.85 kg | 9.6 | |
| K&F Concept 64 inch/163cm Lightweight Aluminum Travel | travel with a ball head | 64.1 inches | 2.53 lb | 9.5 | |
| Victiv Tripod for Camera and Phone | tripod and monopod use | 72 inches | 3.3 lb | 9.2 | |
| Celestron Heavy-Duty Alt-Azimuth Tripod for Spotting Scopes | heavy-duty alt-azimuth control | 45 inches | 7.8 lb | 9.0 | |
| JOILCAN 74" Tripod for Camera Cell Phone | a 15 lb stated load limit | 74 inches | 3.15 lb | 8.8 | |
| Nietoto 2 in 1 Camera Tripod | ball head and monopod flexibility | 68 inches | 3.85 lb | 8.5 | |
| ZWO Seestar TH10 Tripod Head with TC20 | Seestar equatorial mode | 0.91 lb | 8.2 |
How we compared these smart telescope tripods
We checked each tripod against the same list of needs. We looked at stated load limits first, because a tripod that is too weak for your scope will shake or slip.
Next we checked mount threads. A 1/4 inch screw is common here, but some picks add 3/8 inch connectors or Arca Swiss plates.
Those details change how fast you can swap a scope, camera or phone.
Then we checked height and folded size. Tall picks reach 68 to 74 inches for standing use.
Short picks like the DWARFLAB mini tripod stop at 53 cm and suit low viewing or travel.
We also checked head type. Pan heads give separate controls.
Ball heads give free movement. The Celestron pick adds slow-motion controls, while the ZWO pick adds hydraulic damping for Seestar equatorial work.
Weight mattered too. The Amazon Basics pick is only 1.23 lb.
The Celestron pick is 7.8 lb. That gap decides whether you carry the tripod to a dark site or keep it in the yard.
How much weight should a smart telescope tripod hold
A smart telescope tripod should hold your scope plus its mount, adapters and any camera you add. Leave margin above the bare scope weight so the legs and head stay steady.
What the low limits mean
The Amazon Basics pick stops at 4.4 lb. That limit suits lighter smart telescopes only.
It is not a pick for large telescopes or long lenses, according to Amazon Basics.
What the higher limits mean
The JOILCAN states 15 lb. The Nietoto states 33 lb.
The K&F Concept ball head states 17.6 lb. Those stated limits give more room for heavier smart scopes and added gear.
What height should a tripod for a smart telescope reach
A tripod for a smart telescope should reach a height you can use without bending for long sessions. Standing viewers often want eye level, while seated viewers can use a shorter tripod.
Tall tripods for standing use
The VICTIV and JOILCAN picks reach 74 inches. The Victiv 72-inch pick reaches 72 inches.
The Nietoto reaches 68 inches. Those heights suit standing use and views over fences or tall grass.
Short tripods for travel and low setups
The DWARFLAB mini tripod reaches 53 cm. The Celestron reaches 45 inches.
Short tripods pack smaller and work well for seated use, but they force more bending.
Which head type works best on a smart telescope tripod
A smart telescope tripod head should let you aim slowly and lock in place. Pan heads, ball heads and slow-motion controls each solve that job in a different way.
Pan heads
Pan heads give separate locks for pan and tilt. The Amazon Basics, VICTIV, Victiv and JOILCAN picks use 3-way or pan heads.
That setup suits slow left-right and up-down moves.
Ball heads
Ball heads rotate in many directions at once. The K&F Concept and Nietoto picks use 36 mm ball heads.
That setup is fast to adjust, but it can drift while you lock it.
Slow-motion and hydraulic heads
The Celestron pick adds two slow-motion controls for small tracking moves. The DWARFLAB and ZWO picks use hydraulic heads for smoother motion.
Those heads suit viewers who make many small adjustments.
Do you need a model-specific tripod for a Seestar or DWARF scope
You need a model-specific tripod when the scope needs a special head for equatorial mode or a direct fit. A general camera tripod may still work for basic alt-azimuth use.
Seestar options
For Seestar S50, ZWO says the TH10 alone is enough. For Seestar S30, ZWO recommends the TH10 plus TC20 combo.
Our equatorial mount for seestar s30 guide explains the S30 side, and our equatorial mount for seestar s50 guide covers the S50 side.
DWARF options
The DWARFLAB mini tripod is made for DWARF mini and DWARF 3. Its 1/4 inch and 3/8 inch connectors fit the intended scopes directly.
That direct fit saves time during setup.
General mounts and Celestron scopes
If you use a Celestron scope or spotting scope, our best celestron tripods for telescopes guide covers that brand. Our star adventurer gti vs 2i pro guide also helps if you plan to move beyond a photo tripod.
How do you set up and care for a smart telescope tripod
Set up a smart telescope tripod on firm, flat ground first. Spread the legs evenly.
Then raise the legs to a height that keeps the scope stable without shaking.
Check that each leg lock holds before you mount the scope. Tighten the quick-release plate or screw by hand.
Leave the scope level if your model needs a bubble level for setup.
Use a weight hook or hang a backpack from the center column in wind. The VICTIV, JOILCAN and DWARFLAB picks list a hook or weight option for added stability.
After use, fold the legs fully and store the tripod in its bag. Wipe off dew or dust before storage.
Keep the head and plate dry so threads and locks stay smooth.
If you are new to this hobby, our How to Use a Telescope for Beginners: A Beginner’s Guide walks through basic setup steps. That guide pairs well with a simple tripod and a light smart scope.
Which tripod should you buy for your smart telescope
Pick the Amazon Basics 50-inch tripod if your scope and gear stay under 4.4 lb and you want the lightest carry. Pick the DWARFLAB mini tripod for DWARF 3 or DWARF mini.
Pick the ZWO TH10 plus TC20 for Seestar equatorial work.
Pick the JOILCAN 74-inch tripod if you want a stated 15 lb limit and tall height. Pick the K&F Concept if you want a ball head and a 15.5-inch folded size.
Pick the Celestron if you want slow-motion controls and a center tray.
Check your scope weight and thread before you order. That one check will save more time than any extra feature on this list.
Our top 3 picks at a glance
-
1
Best for light smart telescopes on a budgetAmazon Basics 50-inch Lightweight Portable Camera Tripod
9.7/10 our score
See it on Amazon -
2
-
3
Best for DWARF 3 smart telescopesDWARFLAB Mini Tripod with Hydraulic Head
9.6/10 our score
See it on Amazon
Frequently asked questions
What thread does a smart telescope tripod need?
Most general tripods here use a standard 1/4 inch screw. Check your smart telescope manual before you order, because some models use model-specific heads or adapters.
How much weight should a smart telescope tripod hold?
Pick a tripod whose stated limit sits well above your scope weight. The Amazon Basics pick stops at 4.4 lb, while the JOILCAN states 15 lb and the Nietoto states 33 lb.
Do I need a tripod for a smart telescope?
Many smart telescopes can sit on a flat table, but a tripod adds height and smoother aiming. A tripod also helps when you need a clear view over grass, railings or other viewers.
What height should a smart telescope tripod reach?
About eye level works for standing use, while a short mini tripod suits table-height work. Tall picks here reach 68 to 74 inches, while the DWARFLAB mini tripod stops at 53 cm.
About this guide: Our look at tripod for smart telescope draws on maker specs, materials and what owners report. See how we research.



